Dyson AM07 (300912-01)

Each Dyson fan is a true work of design art. In addition, the products of the English brand are distinguished by an innovative principle of operation based on the use of a rotorless air circulation mechanism.

Performance

In their design, fans of this type are devoid of moving parts, which makes them safer in comparison with models based on an axial mechanism. The air flow is generated by special slots along the perimeter of the inner surface of the oval ring, which involve the air from the outside. Additionally, air is drawn in from the rear face of the ring, where a low pressure zone is created. The performance of the fan deserves high praise — not every model will be able to overtake 500 liters of air through itself in just 1 second.

Helmholtz resonator

To reduce the noise level in the design of the fan, a Helmholtz resonator is used (also used in the car exhaust system). Indeed, in comparison with models of similar capabilities, the device emits much less noise (64 dB at maximum speed).

Air currents

The air flow at the outlet of the ring has a homogeneous and uniform structure. The degree of blowing intensity is regulated by a 10-position switch for operating modes. The change in intensity occurs smoothly with a gradual increase or decrease in power. The number of the activated mode is displayed on a small LED display on the fan housing.

Remote control

It is possible to control the operation of the device through the remote control. It can also be used to set the fan off timer(15, 30, 45 minutes and then at hourly intervals up to a maximum value of 9 hours). The only factor that can scare away from the purchase of the device lies in its too high cost (more expensive than many models of air conditioners). But advanced technology, spectacular appearance and a high level of safety in the operation of the fan are definitely worth the money.